TM 9-2330-285-14&P/TO 36A11-21-10-1
ROCKER ARMS AND STRUTS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
ROCKER ARM REMOVAL
6 Rocker arm (1) to
a. Remove cotter pin (3).
Cotter pin (3),
frame adapter (2)
two washers
b. Remove two washers (4) and pin (5).
(4) and pin (5)
Remove using a flat-tip screwdriver,
Screw (7)
7 Axle arm (6)
a. Remove cotter pin (8).
8 Rocker arm (1)
Cotter pin (8),
b. Remove two washers (9) and pin (10).
to axle arm (6)
two washers
(9) and pin (10)
a. Remove cotter pin (12) using cutting
Cotter pin (12)
9 Rocker arm (1)
pliers.
to hydraulic
and pin (13)
b. Remove pin (13).
cylinder (11)
Throw away cotter pins.
NOTE
When removing the left front rocker arm, step 10 must be
done. It is omitted in all other cases.
10 Rocker arm (1)
Remove using a cross-tip screwdriver.
Screw (15)
to clamp (14)
11
Rocker arm (1)
Remove from dolly set.
ROCKER ARM INSTALLATION
12
Rocker arm (1)
Position on the dolly set.
13 Rocker arm (1)
Cotter pin (12)
a. Install pin (13).
to hydraulic
and pin (13)
b. Secure with new cotter pin (12) using
cylinder (11)
cutting pliers.
Install using flat-tip screwdriver.
Screw (7)
14 Axle arm (6)
15 Rocker arm (1)
a. Install pin (10) and two washers (9).
Cotter pin (8),
b. Install cotter pin (8).
two washers
to axle arm (6)
(9) and pin (10)
16 Rocker arm
a. Install pin (5) and two washers (4).
Cotter pin (3),
(1) to frame
two washers (4)
b. Install cotter pin (3).
and pin (5)
adapter (2)