TM 9-2330-285-14&P/TO 36A11-21-10-1
DATA PLATES
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Cross-tip screwdriver
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
This procedure is typical for all data plates on the
equipment. The amount of retaining screws will vary between
data plates.
1 Data plate (1)
Screws (2)
Remove using a cross-tip screwdriver.
2
Remove.
Data plate (1)
INSTALLATION
Data plate (1)
Put in position.
3
Screws (2)
Install using a cross-tip screwdriver.
4 Data plate (1)
TASK ENDS HERE
