TM 9-2330-287-14&P
HYDRAULIC LINE REPLACEMENT- CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Bleed brakes (page 4-51).
TASK ENDS HERE
AIRBRAKE LINE REPLACEMENT
This task covers:
c. Relay valve to brake chambers
a. Rear section hoses to air filters
b. Air filters to relay valve
INITIAL SETUP
Materials/Parts
Tools
Screwdriver, flat-tip
New airbrake lines (as required)
Wrench, open-end, 5/8-inch
ACTION
ITEM
LOCATION
REMARKS
REAR SECTION HOSES TO AIR FILTERS
NOTE
All procedures are for one Iine each and are typical of the service and emergency
braking systems.
Fitting (3)
Using wrench, remove.
Line (1) to
1.
elbow (2)
Fitting (5)
Using wrench, remove.
Line (1) to
2.
filter (4)
Grommet (7)
Using screwdriver, pry out of hole.
Frame (6)
3.
Line (1) and
Remove.
Filter (4) to
4.
grommet (7)
elbow (2)
