TM 9-2330-287-14&P
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
Draincock (2)
1. Air reservoir (1)
Open, allowing air to drain.
Four lines (4)
2. Relay valve (3)
Using 5/8-inch wrench, remove.
Three nuts (6) and
3. Three studs (5)
Using 9/16-inch wrench, remove.
three Iockwashers (7)
4.
Remove.
and gasket (8)
Discard gasket (8).
INSTALLATION
New gasket (8) and
5. Three studs (5)
Position on studs.
relay valve (3)
Three nuts (6) and
6.
Using 9/16-inch wrench, install.
three Iockwashers (7)
Four lines (4)
7. Relay valve (3)
Using 5/8-inch wrench, install.
Draincock (2)
8. Air reservoir (1)
Close.
NOTE
TASK ENDS HERE