TM 9-2330-287-14&P
AIR RESERVOIR
This task covers:
a. Removal (page 4-72)
b. Installation (page 4-72)
INITIAL SETUP
Equipment Condition
Tools
Relay valve removed (page 4-68).
Handle, reversible, 3/8-inch
square drive
Socket, 9/16- by 3/8-inch square
drive
Wrench, open-end, 9/16-inch
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Open.
Draincock (2)
I.
Air reservoir (1)
Using socket, handle, and wrench,
Four capscrews (4),
2. Brackets (3)
remove.
four lockwashers
(5), eight flat
washers (6) and
four nuts (7)
Remove from brackets (3).
Air reservoir (1)
3.
INSTALLATION
Position on top of brackets (3).
Air reservoir (1)
4. Brackets(3)
Using socket, handle, and wrench, install.
Four capscrews (4),
5.
four lockwashers
(5), eight fiat
washers (6), and
four nuts (7)
Close.
Draincock (2)
6. Air reservoir (1)
