TM 9-2330-287-14&P
AIRHOSE, REAR SECTION
This task covers:
c. Assembly (page 4-86)
a. Removal (page 4-84)
d. Installation (page 4-86)
b. Disassembly (page 4-85)
INITIAL SETUP
Tools
Handle, reversible, 3/8-inch
square drive
Socket, 7/16- by 3/8-inch square
drive
Wrench, open-end, 3/4-inch
Wrench, open-end, 13/16-inch
Wrench, open-end, 1-inch
Wrench, open-end, 1 1/16-inch
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
NOTE
Steps 1 and 2 apply to model M796A1 only.
Using socket and handle, remove.
TWO capscrews
1. Antirotation
(2) and two
bracket (1)
Iockwashers (3)
Remove.
Antirotation
2. Reach tube,
bracket (1)
rear section (4)
Disconnect.
Two hoses (6)
3. Fittings (5)
Using 1- and 1 1/16-inch wrenches,
TWO nuts (8) and
4. Fittings (7)
remove.
two hoses (6)
