TM 9-2330-287-14&P
LANDING LEG REPAIR (M796) - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
ASSEMBLY CONTINUED
Using punch, install.
Two bearing cups (2)
32. Swivel plate (1)
a. Install new O-ring (4).
New O-ring (4) and
33. Inner tube (3)
b. Pack bearing cone (5) with GAA grease
bearing cone (5)
and install.
Refer to TM 9-214.
Install.
Swivel plate (1)
34.
a. Pack bearing cone (6) with GAA grease.
Bearing cone (6) and
35. Swivel plate (1)
Refer to TM 9-214.
new O-ring (7)
b. Install bearing cone (6).
c. Install new O-ring (7).
Flat washer (8) and
Using 2-inch socket and handle with 1/2-
36. Inner tube (3)
inch square drive, install.
castellated nut (9)
Bottom castellated nut (9) to seat
a. Loosen castellated nut (9), alining next
Cotter pin (10)
37. Castellated nut (9)
slot of nut with cotter pinhole in inner
tube (3).
Swivel plate (1) should turn freely.
b. Using pliers, install cotter pin (10).
Install, alining mounting holes.
Wheel and tire (11)
38. Swivel plate (1)
Using 1 1/2-inch socket, handle with 1/2-
Spacer (12), cap-
39.
inch square drive, and 1 1/2-inch wrench,
screw (13), and
install.
castellated nut (14)
a. Aline nearest slot of castellated nut
Cotter pin (15)
40. Castellated nut (14)
with cotter pinhole.
b. Install cotter pin (15).
5-10
