TM 9-2330-287-14&P
LANDING LEG REPAIR (M796A1) - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
ASSEMBLY
Position on leg assembly, alining mounting
Handcrank (2)
14. Leg assembly (1)
hole.
Using 7/16-inch socket, handle, and 7/16-
Capscrew (3) and
15. Handcrank (2)
inch open-end wrench, install.
nut (4)
Position, alining mounting holes.
Four brackets (5)
16. Leg assembly (1)
Four capscrews (6)
Using 3/4-inch socket and handle, install.
17. Four brackets (5)
and four lock-
washers (7)
Flange plates,
Position, alining mounting holes.
18.
left and right (8)
Using 9/16-inch socket, handIe, and
Sixteen capscrews
19. Flange plates,
9/16-inch open-end wrench, install.
(9) and sixteen
left and right (8)
nuts (10)
Lock bar (11)
Position, alining mounting holes.
20.
Two capscrews (12),
Using 3/4-inch socket, handle, and 3/4-
21.
inch open-end wrench, install.
two nuts (13), and
two Iockwashers (14)
Position on leg assembly (1).
Swivel plate (15)
22. Leg assembly (1)
Axle (16) and
a. Position axle (16) through swivel
23. Swivel plate (15)
two roll pins (17)
plate.
b. Using punch, install pins (17).
Axle (18)
Position in swivel plate (15).
24.
Two wheels (19) and
a. Position wheels (19) on axle (18).
25. Axle (18)
two roll pins (20)
b. Using punch, install pins (20).