TM 9-2330-287-14&P
LANDING LEG REPAIR (M796) - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Install landing leg (page 4-95).
TASK ENDS HERE
LANDING LEG REPAIR (M796A1)
This task covers:
a. Disassembly (page 5-12)
b. Assembly (page 5-14)
INITIAL SETUP
Tools - Continued
Tools
Wrench, open-end, 7/16-inch
Handle, reversible, 3/8-inch square
Wrench, open-end, 9/16-inch
drive
Wrench, open-end, 3/4-inch
Punch
Socket, 7/16- by 318-inch square
Equipment Condition
drive
Socket, 9/16- by 3/8-inch square
Landing leg removed (page 4-95).
drive
Socket, 3/4- by 3/8-inch square
drive
ACTION
ITEM
REMARKS
LOCATION
DISASSEMBLY
Two roll pins (2)
Using punch, remove.
1.
Swivel plate (1)
Two wheels (3) and
Remove.
2.
axle (4)
Two roll pins (5)
Using punch, remove.
3.
Axle (6)
Remove.
4.
Swivel plate (1)
Remove.
Leg assembly (7)
5.
Two capscrews (9),
Using 3/4-inch socket, handle, and 3/4-
Flange plates,
6.
two nuts (10), and
inch open-end wrench, remove.
left and right (8)
two Iockwashers(11)
Lock bar (12)
Remove.
7.
