TM 9-2330-297-14&P
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 3.
Check brakes for excessive clearance
Adjust brakes as described on page 4-60.
WHEELS
6. EXCESSIVELY WORN, SCUFFED, OR CUPPED TIRES.
Step 1.
Check axle for bent spindle.
Notify direct support maintenance.
Step 2.
Check axle alignment.
Aline axle. See page 4-44.
LANDING GEAR
7. DIFFICULTY IN LOWERING OR RAISING LANDING GEAR.
Step 1.
Check left-hand jackscrew and gearbox operation.
Disconnect coupling (1) at cross-shaft (2).
Turn crank handle (3).
If handle (3) turns hard, continue with step 2.
If handle (3) turns easy, right-hand jackscrew is-bad. Replace right-hand landing gear leg (4). See
page 4-85.
4-17
