TM 9-2330-297-14&P
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step 2.
Using 9/16-inch wrench remove capscrews (5) and cap (6).
Turn crank handle (3).
If handle (3) turns easy, left-hand jackscrew is bad. Replace left-hand landing gear leg. See page 4-85.
If handle (3) turns hard, gearbox is bad. Replace gearbox. See page 4-91.
Section VI. CLEANING AND INSPECTION INSTRUCTIONS
Page
Page
Cleaning Instructions ................................................ 4-18
Inspection Instructions........................... 4-20
WARNING
Improper cleaning methods and use of unauthorized cleaning liquids or solvents can
injure personnel and damage equipment. Refer to TM 9-208-1 and TM 9-247.
CLEANING INSTRUCTIONS
Cleaning instructions will be the same for the majority of parts and components that make up the semitrailer.
TA223116
4-18