TM 9-2330-297-14&P
SPLASH GUARD
This task covers:
a. Removal (page 4-100)
b. Installation (page 4-100)
INITIAL SETUP
Tools
Handle, reversible, 1/2-inch
square drive
Socket, 9/16- by 112-inch
square drive
Wrench, box, 9116-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Chassis rear
Nuts (1), lock-
Using 9/16-inch box wrench and 9/16-inch
end, mounting
washers (2), screws
socket wrench, remove four nuts (1),
bracket
(3), retainer plate
lockwashers (2), screws (3), retainer plate
(4) and splash
(4), and guard (5).
guard (5)
INSTALLATION
2.
Chassis rear
Nuts (1), lock-
a. Assemble parts on mounting bracket (6).
end, mounting
washers (2), screws
b. Using 9/16-inch box wrench and socket
bracket
(3), retainer plate
wrench, tighten nuts (1).
(4) and splash
guard (5)
TASK ENDS HERE
4-100
