TM 9-2330-356-14
Table 3-2. Operator/Crew Troubleshooting (Con`t).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
BRAKES (Con't)
6. SLOW BRAKE APPLICATION OR SLOW RELEASE.
Check for bent or dented air lines.
If lines are bent or dented, notify unit maintenance.
7.
GRABBING BRAKES.
Check for moisture in rear air reservoir.
Drain rear reservoir (fig. 2-2).
TIRES
EXCESSIVELY WORN, SCUFFED, OR CUPPED.
8.
Step 1.
Check tire pressure.
Inflate to 60 psi for hard surface roads, and 40 psi for cross-country or sand.
Step 2.
Check for loose wheels.
Tighten wheel stud nuts.
Step 3.
Check for bent wheel.
If bent, notify unit maintenance.
LANDING GEAR
DIFFICULTY IN TURNING OPERATING CRANK.
9.
Check if lower leg is bent.
a. If bend is not readily apparent, check to determine whether lower leg will center in vari-
ous positions.
b. If bent, notify unit maintenance.
3-30
