TM 9-2330-357-14&P
4-32. SERVICE BRAKE MAINTENANCE (Con't).
NOTE
Anchor guides with springs are on adjustment end of cylinder.
3.
Remove four anchor guides (4), two springs
(5), four lockwashers (6), and plungers (7)
from brake assembly (2). Discard
4.
Remove seal (8) and plunger (9) from brake
assembly (2). Discard seal.
5.
Remove adjustment screw (10), seal (11),
actuator (12), and plunger (13) from brake
assembly (2). Discard seal.
6.
Remove seal (23) and plunger (22) from
brake assembly (2). Discard seal.
7.
Remove adjustment screw (18), seal (19),
actuator (20), and plunger (21) from brake
assembly (2). Discard seal.
8.
Remove nut (17), lockwasher (16), bolt (14),
and clip (15) from brake assembly (2).
Discard lock-washer. Repeat for other clip.
4-56
