TM 9-2330-357-14&P
5-6. LIGHTING WIRING HARNESS REPLACEMENT (Con't).
b.
INSTALLATION
1.
If removed, install grommet (14) on lighting wiring harness (8).
2.
Install lighting wiring harness (8) into semitrailer.
3.
Install 21 clamps (12) with screws (13) as required.
4.
Connect three connectors (6) to three left side marker lights.
5.
Connect connector (15) to left outrigger marker light.
6.
Connect 11 c onnectors (11) to two composite lights and three marker lights on rear of semitrailer.
7.
Connect connector (10) to right outrigger side marker light.
8.
Connect three connectors (9) to three right side marker lights.
9.
Connect two ground wires (7) to frame.
10.
Install cover (2) to connector (3) with four nuts (5), new lockwashers (4), and screws (1).
FOLLOW-ON TASKS:
Install electrical shields, as required (para 4-28).
5-17
