TM 9-2330-357-14&P
5-7. AXLE REPLACEMENT (Con').
t
4.
Raised rear of semitrailer until clearance for
bogie assembly (4) is obtained.
5
Push or pull bogie assembly (4) out rear of
semitrailer.
6.
Support rear of semitrailer on jackstands.
7.
8.
Disconnect air line from wheels at emergency
9.
Raise rear of bogie assembly (4) with suitable
lifting device until weight has been removed
from wheels (6).
10.
Pull or push axle (7) off springs (5) and away
from bogie assembly (4).
b. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame or
excessive heat. The solvent's flash point is 100 -138 (38 -59 ). If you become
F
F
C
C
dizzy while using cleaning solvent, Immediately get fresh air and medical help. If
solvent contacts eyes, immediately wash your eyes and get medical aid.
1.
Remove all buildup of grease or dirt by using a clean rag
or medium bristle brush and dry cleaning
solvent, and allow to dry.
2.
Inspect for loose, missing, or damaged hardware.
TA706528
5-19