TM9-2330-358-14&P
Removal.
a.
Wear welding mask, gloves, and apron when welding or
using cutting torch. Failure to wear adequate
protective clothing may result in serious injury.
Before starting procedure, measure and record the
following:
Distance between top of s-hook and bottom of dummy
coupling connector elbow.
Distance between bottom of s-hook and bottom edge of
nose box.
(2) Grind weld off nose box (1) surface.
(3) Repeat steps 1 and 2 for other dummy coupling as needed.
Figure 4-29.
Dummy Coupling
b.
Installation.
(1) Position s-hook (2, fig. 4-29) and dummy coupling (3) according to recorded
measurements.
4-57