TM9-2330-358-14&P
b.
Installation.
(2) Secure mud flap (4) with four screws (3), washers (2) and nuts (l).
TASK ENDS HERE
4-61. FLOOR
This task covers:
Removal
Installation
INITIAL SETUP
Tools
1/2" torque-x driver bit (Appendix D)
General mechanics tool kit
a,
Removal.
See Appendix G for information on board size and
configuration of floor for M871A1 semitrailer.
(1) Measure plank (1, fig. 4-62) to be replaced.
(2) Remove screws (2) as needed to free plank (l).
(3) Lift planks (1) away from frame.
(4) Repeat as needed for any other planks needing replacement.
b.
Installation.
(1) Place planks (1, fig. 4-62) into position.
(2) Install screws (2).
(3) Repeat for other planks that were removed.
4-105
