TM9-2330-358-14&P
INITIAL SETUP
Tools
General mechanics tool kit
a.
Removal.
(1) Remove four rivets (1, fig. 4-65) from data plate (2) .
(2) Remove data plate (2) .
(3) Repeat steps 1 and 2 for other data plate as needed.
b.
Installation.
(1) Install data plate (2, fig. 4-65) into position.
(2) Secure data plate (2) with four rivets (l).
(3) Repeat steps 1 and 2 for other data plate as needed.
Figure 4-65.
Data Plate
TASK ENDS HERE
4-109