TM9-2330-358-14&P
Figure 4-59.
Chassis Bulkhead Assembly
b.
Wing Panel Removal.
(8)0
(2) Remove wing panel (8).
(3) Repeat steps 1 and 2 for other wing panel as needed.
Wing Panel Installation.
c.
(1) Install wing panel (8, fig. 4-59).
(2) Secure wing panel (8) with seven bolts (7), washers (6) and nuts (5).
(3) Repeat steps 1 and 2 for other wing panel as needed.
d.
Bulkhead Installation.
(1) Install bulkhead (4, fig. 4-59).
On the M871A1 semitrailer, secure bulkhead (4) with 11
bolts (3), washers (2) and nuts (l).
There are two sizes of bolts that secure the bulkhead.
The longer bolts are used to secure the areas with the
frame extension on the front of the semitrailer.
(2) Secure bulkhead (4) with nine bolts (3), washers (2) and nuts (l).
TASK ENDS HERE
4-102
