TM9-2330-368-14&P
2-13. CONNECTING HEMAT TO TOWING
VEHICLE (cont)
f. Connect the HEMAT lighting system to the
electrical system of the towing vehicle as
follows:
(1) Remove intervehicular cable (14) from
storage box.
(2) Open protective covers ( 1 5) of
intervehicular cable. Lock each cover
of intervehicular cable by sliding latch
lock (16) in place.
(3) Lift receptacle cover (17) on trailer.
NOTE
Check receptacle for bent or broken pins.
(4) Plug intervehicular cable into
receptacle ( 18). Cable plugs are keyed
so connection can be made only one
way.
(5) Connect opposite end of cable to tow-
ing vehicle in the same way (steps (3)
and (4)).
g. Pull plunger (19) out and raise shoe (20)
using handle (2 I ) until second lowest hole
in shoe engages plunger detent.
TA252147
2-16