TM9-2330-368-14 & P
2-14. GATE INSTALLATION
To install gates, proceed as follows:
a. Using an assistant, hold left hand front gate
rack horizontally and place next to left
hand side of trailer forward.
b. Position gate so both hinge pins ( 1 ) are
alined with ears (2) on trailer frame.
c. Move gate to engage hinge pins with holes
in ears. Lift gate slightly to clear hinge
stops if necessary.
d. Lift up left hand front gate (3) to vertical.
e. Engage slide bolt (4) on gate with pocket
in frame to secure.
f. Install left hand rear gate (steps a through
d).
g. Lift up left hand rear gate to vertical so
holes in latch eyes (5) are aligned. Install
latch pins (6) in latch eyes to secure.
h. Install right hand rear gate in same manner
as left hand front gate (steps a through
e).
Install right hand front gate in same man-
i.
ner as left hand rear gate (steps a through d
and g).
Install front gate and rear gate in same man-
j.
ner as left hand rear gate (steps a through
d and g).
NOTE
Gates can be lowered to permit bet-
ter access and easier loading. Left
hand front gate cannot be lowered
unless left hand rear gate is lowered
first. The same is true of the right
hand rear gate.
2-18
