TM9-2330-368-14-& P
Table 4-2. Troubleshooting Table
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ELECTRICAL SYSTEM
(See Schematic Diagram, page no. 4-21)
1. ALL LAMPS DO NOT LIGHT.
Step 1.
a. If cable is defective, replace cable.
b. If cable is not defective, proceed to step 2.
Step 2.
If wiring has a ground or open circuit, repair or replace wiring (para. 4-13).
2. ONE OR MORE LAMPS (BUT NOT ALL) WILL NOT LIGHT.
Step 1.
a. Replace defective light assemblies.
b. If light is not damaged, proceed to step 2.
Step 2.
If wiring has a ground or open circuit, repair or replace wiring.
3. DIM OR FLICKERING LIGHTS.
Step 1.
a. Replace or repair defective light assemblies.
b. If light assemblies are not defective, proceed to step 2.
Step 2.
If wiring is defective, repair or replace wiring.
4-10