TM9-2330-368-14 & P
Table 4-2. Troubleshooting Table (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TIRES
EXCESSIVELY WORN OR SCUFFED TIRES OR FLAT SPOTS ON TIRES.
NOTE
Refer to para. 3-6 for jacking procedure.
Check for loose wheels.
Step 1.
a. If wheels are loose, tighten wheel nuts.
b. If wheels are not loose, proceed to step 2.
Check for loose wheel bearings (para. 4-14e).
Step 2.
a. If wheel bearings are loose, adjust wheel bearings.
b. If wheel bearings are not loose, proceed to step 3.
Step 3.
Check suspension system for damaged rubber bushings, springs, and loose or missing
bolts and nuts.
If suspension system is damaged or has loose or missing bolts and nuts, notify direct
a.
support maintenance.
b. If suspension system is not damaged and all hardware is complete and secure, notify
direct support maintenance.
4-15
