TM9-2330-368-14 & P
5-7. TORQUE ARM ADJUSTMENT (cont)
h.
Check distances LL and LR and continue
to adjust torque arm until LL equals LR.
Tighten clamp bolts (10) on front torque
arm (12) to 55-60 lb-ft (74.6-81.3 Nm).
i.
Measure spacing SL between hub exten-
sions (7 and 13) and record.
Measure spacing SR between hub exten-
j.
sions (9 and 14) and record.
Spacing SL should equal SR. If SL does not
k.
equal SR, loosen clamp bolts (10) on rear
torque arm (15) and turn rod (11) to adjust.
If SL is greater than SR, shorten torque
arm. If SL is less than SR, lengthen torque
arm.
l.
Check spacing SL and SR and continue to
adjust torque arm until SL equals SR.
Tighten clamp bolts (10) on rear torque
arm (15) to 55-60 lb-ft (74.6-81.3 Nm).
m. Remove screws (1), and hub extensions
(5).
n.
Install hub caps (2) and gaskets (3) with
screws (1).
5-7
