TM9-2330-368-14 & P
(1) Place replacement floor board in posi-
5-9. FLOOR BOARDS
tion on frame. Mark location of mount-
ing holes.
Materials/Tools
Portable electric drill
(2) Remove boards. Then using a No. J
Twist drill, No. J
drill bit (0.277 inch) and drill, bore
Countersink
holes in floor board to match mount-
Screwdriver bit (app D)
ing holes in frame. Countersink holes.
Inspection. Inspect all floor boards for
a.
(3) Install torx screws as required to secure
breakage and warpage. Replace floor
floor board to frame. Heads of screws
boards selectively after inspection for de-
should be below surface of boards.
fects.
NOTE
Removal. Remove torx screws as required
b.
Trailers (VIN 1S9US1722DM063127
to remove any given floorboard (A through
and after) are equipped with ship lap
G).
lumber. Refer to Bulk Items in Appen-
dix F.
c.
facturing information.
Installation.
d.
NOTE
Floor boards F and G must be selec-
tively fit to match existing planking.
After initial fitting of the width, mark
the floor board for cutting. Saw or
plane the floor board using power
equipment. Repeat operation until
floor board fits in space. There should
be a tight fit for all floor boards.
TA252208
5-9
