TM 9-2330-371-14&P
AIR LINE REPAIR
This task covers:
Repair (page 4-99)
INITIAL SETUP
Personnel Required
Tools
One
Tape, measuring
Cutter, tubing
Equipment Condition
Wrench, 5/8-inch, open-end
Wrench, 9/16-inch, open-end
Air reservoir drained (page 3-9).
Materials/Parts
Air line tubing (as required)
Slip nut assemblies (as required)
Air line connectors (as required)
Tape, teflon (item 18, appendix E)
ACTION
ITEM
REMARKS
LOCATION
REPAIR
NOTE
Air line tubing can be replaced or repaired depending
on the length of the damaged section, If the damaged
section is short, replace. If the damaged section is
long, repair.
a. Using tubing cutter, cut out.
Damaged section (2)
Tubing (1)
1.
b. Measure cut out piece of tubing and
using tubing cutter, cut new piece 1/2
inch shorter.
