TM 9-2330-371-14&P
DATA PLATE
This task covers:
a. Removal (page 4-143)
b. Installation (page 4-143)
INITIAL SETUP
Personnel Required
Tools
One
Screwdriver, cross-tip
Wrench, 3/8-inch, open-end
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Using 3/8-inch wrench and screwdriver,
Six nuts (3), lock-
Data plate (1)
1.
unscrew and take out.
washers (4), and
to right side of
screws (5)
gooseneck (2)
Data plate (1)
Remove.
Gooseneck (2)
2.
INSTALLATION
Data plate (1)
Place on right side of gooseneck frame and
3.
aline screwhoies.
Six screws (5),
Screw in and tighten using 3/8-inch wrench
4.
Iockwashers (4),
and screwdriver.
and nuts (3)
TASK ENDS HERE
TA224312
