TM9-2330-372-14&P
d. If anything looks wrong and you can't fix it, write it down on your DA Form 2404. If you find something seriously
wrong, report it to direct support as soon as possible.
Keep it clean: Dirt, grease, oil and debris only get in the way and may cover up a serious problem. Clean as you
work and as needed. Use dry cleaning solvent (PD-680) (App. E, Item 2) to clean metal surfaces. Use soap when you
clean rubber or plastic materiel.
TABLE 4-1 ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES
INTERVAL
ITEM TO BE INSPECTED
ITEM
PROCEDURE: CHECK FOR AND HAVE REPAIRED, FILLED,
NO.
Q
S
A
REPLACED, OR ADJUSTED AS NEEDED
NOTE
Perform operator/crew PMCS prior to or in
conjunction with organizational PMCS if:
a.
There is a delay between the daily operation of the equipment and the
organizational PMCS.
b.
Regular operator is not assisting/participating.
1
VEHICLE EQUIPMENT
Inspect towing/air line couplings for damaged or loose connections. Repair or replace as
required.
2
WHEEL BEARINGS
Clean wheel bearings and repack in accordance with lubrication chart (fig. 3-1).
3
BRAKES
a.
Adjust brakes (para. 4-18).
b.
Inspect brake linings for wear and replace brake shoes (para. 4-19).
c.
Check all air lines for leaks, bends and cracks. Check mounting clamps for
security. Replace defective components as required.
d.
Remove air filter element (para. 4-24).
4-3
