TM9-2330-372-14&P
CHAPTER 4
ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT
4-1. COMMON TOOLS AND EQUIPMENT. For authorized common tools and equipment, refer to the Table of
Organization and Equipment (TOE) or the Modified Table of Organization and Equipment (MTOE) applicable to your
unit.
4-2. SPECIAL TOOLS, TMDE AND SUPPORT EQUIPMENT. No special tools, TMDE, or support equipment are
required to maintain these trailers.
Section II. SERVICE UPON RECEIPT OF MATERIAL
4-4. UNPACKING.
a. Banding and Tiedowns. Remove all banding and movement tiedown straps from the equipment.
b. Protective Coverings.
(1) Remove all tarpaulins, plastic sheeting, etc., used as protective covering for the equipment during
shipping.
WARNING
Dry cleaning solvent (App. E, Item 2) used to clean parts is potentially dangerous to personnel
and property. Do not use near open flame or excessive heat. Flash point of dry cleaning solvent
is 138 degrees F (59 degrees C).
(2) If any exterior parts are coated with rust preventive compound, remove it with dry cleaning solvent (App.
4-5. CHECKING UNPACKED EQUIPMENT.
a. Damage Inspection. Inspect the equipment for damage incurred during shipment. If the equipment has been
damaged, report the damage on DD Form 6.
4-1
