TM 9-2330-373-14 & P
4-36. REAR PLATFORM (cont)
REMOVAL (cont)
WARNING
Platform must be supported in upright position during removal procedure.
Two persons are required, due to the weight of the platform.
1.
Block platform to support it when attaching
hardware is removed.
2.
With platform in upright position and supported
by one of the persons, remove three nuts (1), six
washers (2) and three screws (4) securing three
hinges (3) to van body.
1.
Nut
2.
Washer
3.
Hinge
4.
Screw
3.
Remove screws (1) and washers (2) securing
upper attach plates (3). Remove attach plate,
chain (4) and tubing (5) as a unit.
4.
Remove quick release pins (7) securing upper
end of platform (6) to van body and lower
platform to ground.
1.
Screw
2.
Washer
3.
Attach plate
4.
Chain
5.
Tubing
6.
Platform
7.
Release pin
TA 314830
4-110
