TM 9-2330-373-14 & P
4-36. REAR PLATFORM (cont)
REMOVAL OF HINGES
1.
Remove platform.
2.
Remove four screws (4) and lock washers (5)
securing hinge and strap (3) to body of
semitrailer.
3.
Remove nut (1), two flat washers (2) and screw
(6) which secure the hinge to the platform.
Remove hinge.
INSTALLATION OF HINGES
1.
Position hinge on rear platform and secure it with
screw (6), two flat washers (2) and nuts (1).
1.
Nut
2.
Block platform so that holes in hinge aline with
2.
Flat washer
holes in body of semitrailer.
3.
Hinge and strap
4.
Screw
3.
Secure hinge to body with four screws (4) and
5.
Lock washer
washers (5).
6.
Screw
4.
Install platform in position and secure with quick
release pins.
REMOVAL OF RUBBER BUMPERS
1.
Remove four nuts (3), washers (2) and screws
(1) securing bumper (4) to platform (5).
2.
Remove bumper.
INSTALLATION OF RUBBER BUMPERS
1.
Position rubber bumper (4) on edge of platform
(5).
2.
Secure bumper (4) with four screws (1), washers
(2) and nuts (3).
1.
Screw
4.
Bumper
2.
Washer
5
Platform
3.
Nut
TA 314832
4-112
