TM 9-2330-373-14 & P
4-38. DOORS (cont)
REMOVAL OF INTERIOR HANDLE, SIDE
DOOR/PARTITION DOOR
1. Remove two shoulder screws (1) and spacers
(2) securing interior handle (3) and lower end of
upper locking rod (4) and upper end of center
locking rod (5).
2. Upper locking rod (4) will remain attached to
upper bolt slide fastener. Center locking rod will
remain attached to roller latch lock assembly.
REMOVAL OF HANDLE LOCK ASSEMBLY, SIDE
DOOR/PARTITION DOOR
1. Remove four bolts (6), washers (7) and nuts (8)
securing handle lock assembly (9)
2. Remove handle lock assembly.
1.
Screw
2.
Spacer
6.
Bolt
3.
Handle
7.
Washer
4.
Upper locking rod
8.
Nut
5.
Center locking rod
9.
Handle lock assembly
REMOVAL OF ROLLER LATCH LOOK ASSEMBLY,
SIDE DOOR/PARTITION DOOR
1. Remove shoulder screw (1) and spacer (2)
securing ends of center locking rod (5) and lower
locking rod (11) to roller latch lock assembly
(10).
2. Remove center locking rod (5). Lower locking
rod (11) will remain attached to lower bolt slide
fastener.
3. Remove four bolts (6), washers (7) and nuts (8)
securing roller latch lock assembly (10).
Remove lock assembly.
1.
Screw
7.
Washer
2.
Spacer
8.
Nut
5.
Center locking rod
10.
Roller latch lock assembly
6.
Bolt
11.
Lower locking rod
TA 314839
4-119
