TM 9-2330-373-14 & P
4-38. DOORS (cont)
REMOVAL OF INTERIOR HANDLE, REAR
DOOR/FRONT DOORS
1. Remove two shoulder screws (1) and spacers
(2) securing interior handle (3) and lower end of
center locking rod (5) and upper end of lower
locking rod (4I).
2. Center locking rod (5) will remain attached to
roller latch lock assembly. Lower locking rod (4)
will remain attached to lower bolt slide fastener.
REMOVAL OF HANDLE LOCK ASSEMBLY, REAR
DOOR/FRONT DOORS
1. Remove four bolts (6), washers (7) and nuts (8)
securing handle lock assembly (9).
2. Remove handle lock assembly.
1.
Screw
2.
Spacer
6.
Bolt
3.
Handle
7.
Washer
4.
Lower locking rod
8.
Nut
5.
Center locking rod
9.
Handle lock assembly
REMOVAL OF ROLLER LATCH LOCK ASSEMBLY,
REAR DOOR/FRONT DOORS
1. Remove shoulder screw (1) and spacer (2)
securing ends of center locking rod (5) and
upper locking rod (11) to roller latch lock
assembly (10).
2. Remove center locking rod (5). Upper locking
rod (11) will remain attached to upper bolt slide
fastener.
3. Remove four bolts (6), washers (7) and nuts (8)
securing roller latch lock assembly (10).
Remove lock assembly.
1.
Screw
7.
Washer
2.
Spacer
8.
Nut
5.
Center locking rod
10.
Roller latch lock assembly
6.
Bolt
11.
Upper locking rod
TA 314840
4-120
