TM9-2330-376-14&P
4 - 3 3 . MASTER CYLINDER REPLACEMENT.
This Task Covers:
Removal
b.
Installation
a.
Initial Setup:
Equipment Conditions:
Materials/Parts:
Air reservoir pressure drained (para 3-9).
Rags (Item 12, Appendix E)
One gasket
Tools/Test Equipment:
Three lockwashers
General mechanic's tool kit
Drain pan
REMOVAL
a.
NOTE
Use a drain pan to catch any draining brake fluid. Clean up all spills.
1.
Disconnect tube assembly (1) from reducer (4). Remove reducer and gasket (3) from master cylinder (2).
Discard gasket.
2.
Remove three nuts (12), lockwashers (11), and master cylinder (2) from bracket (10) and studs on airbrake
chamber (9). Discard lockwashers.
3.
Remove boot (6) from master cylinder (2). Remove collar (7) and retain.
4.
Remove filler cap (5) and drain brake fluid from master cylinder (2).
4-52
