TM9-2330-376-14&P
4 - 3 5 . INERTIA BRAKE ACTUATOR AND MASTER CYLINDER ASSEMBLY MAINTENANCE
(XM979 AND XM1061).
This Task Covers:
Removal
a.
d.
Assembly
Disassembly
b.
e.
Installation
c.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
Reach tube removed (para 4-48).
Sealing compound (Item 5, Appendix E)
Dry cleaning solvent (Item 14, Appendix E)
Tools/Test Equipment:
One. gasket-
General mechanic's tool kit
One seal
Torque wrench
Two grease fittings
Two spring pins
Four self-locking bolts
Four sleeves -
Nine Iockwashers
REMOVAL
a.
1.
Remove eight screws (10) and lockwashers (9). Remove retainer (11) and seal (8) from reach tube (4). Discard .
Iockwashers and seal.
2.
Remove ten screws (7) and flatwashers (6). Ease inertia brake actuator assembly (1) out of reach tube (4).
TA700960
4-56
