TM 9-2330-376-14&P
Section
IV.
SPRING
ASSEMBLY
MAINTENANCE
5-6. SPRING ASSEMBLY REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Four Iockwashers
Personnel Required: Two
Tools/Test Equipment:
General mechanic's tool kit
WARNING
Spring assembly is heavy. Two people are required to lift spring assembly. Failure to
follow this warning may result in serious injury.
a.
REMOVAL
1.
Remove four jamnuts (3) and nuts (4). Remove
two U-bolts (7). Repeat for other end of spring
assembly (6).
2.
Remove two nuts (2) and Iockwashers (1).
Remove shackle box cover (5) and top spacer
(10). Repeat for other end of spring assembly (6).
Discard Iockwashers.
Remove spring assembly (6). Remove bottom
3.
spacer (9) and two side spacers (11) from each
axle (8).
TA701017
5-13