TM 9-2330-376-14&P
5-2. FRONT AND REAR AXLE REPLACEMENT (Con't).
INSTALLATION
b.
WARNING
Axle is heavy and awkward to handle. Use caution, provide adequate support, and use
assistance when installing. Failure to follow this warning may result in serious injury or
death.
1.
Position axle (3) under spring assemblies (2) and
raise with floor jack.
2.
Connect spring assembly (2) at each end of axle
Install hydraulic hose, tubes, and fittings to axle
3.
Install backing plates and service brakes to axle
4.
5.
6.
jack from axle (3), Remove jackstands from spring
assemblies (2).
FOLLOW-ON TASKS:
Remove wheel chocks from each end of axle not removed (para 4-17).
TA701014
5-8