TM 9-2330-381-14
2-26.
LOADING AND UNLOADING ABLE PAYLOADS (CONT)
(7) Remove six curb guides (16) from rear recessed area of platform by removing two capscrews (12) and curb
guide stowage brackets (13) or Y-bar straps (13) (U.S.M.C. versions only).
NOTE
Two curb guides will be installed on beavertail after the loading ramps are lowered.
(8) Place four curb guides (16) on platform (two on each side) into second hole inboard from platform edge (pin
side facing outboard from center of platform). Set two remaining curb guides (16) aside until ramps are
lowered.
2-114 Change 1
