TM 9-2330-381-14
2-27.
DUAL WINCH LOADING AND UNLOADING (CONT)
(d) Remove two smaller shackles (12.1) from BII. Unhook auxiliary winch cable (13) from stow hook (14).
Pull auxiliary winch cable (13) along streetside of gooseneck and over platform to front of payload.
(e) Install two large shackles (11) (from platform) and two smaller shackles (12.1) (from BII) on upper left
recovery eye (15) and upper right recovery eye (16). Remove auxiliary snatch block (17) from stowage
on M1070 tractor. Attach auxiliary snatch block (17) to smaller shackle (12.1) on upper left recovery eye
(15) of payload.
(f) Unscrew retainer bolt (18), rotate side housing (19) to open auxiliary snatch block (17), pass auxiliary
winch cable (13) through auxiliary snatch block (17), and rotate side housing (19) to close. Tighten
retainer bolt (18) to secure side housing (19) in closed position.
(g) Pull auxiliary winch cable (13) forward over platform and along curbside of gooseneck toward passenger
side of winching station on tractor.
2-128 Change 1
