TM 9-2330-381-14
(13) Using two people, connect drivers side winch cable (36) to shackle (11) on upper left recovery eye (15) on
payload and secure in place by installing shouldered pin (27) and cotter pin (26).
CAUTION
The payload brake system must be released prior to winching payload onto
semitrailer or damage to equipment may result.
(14) Ensure payload brakes are released. Station ground spotter on curbside of payload to provide direction to
winch operator during winching operation.
CAUTION
WINCH SPEED CONTROL must be placed in LOW for MAX PULL when loading
payloads or damage to equipment may result.
(15) Pull WINCH SPEED CONTROL switch (37) to LOW. Push ENGINE SPEED CONTROL switch (32) to HIGH
ENGINE IDLE. Momentarily push ENGINE SPEED CONTROL switch (33) to lock engine speed at high idle
(approximately 1500 rpm), and then release switch. Engage both DRIVERS SIDE WINCH KICKOUT (20)
and PASSENGER SIDE WINCH KICKOUT (21) switches by pushing on each switch. Push CABLE HOLD
DOWN lever (22) to ON.
Change 1 2-135
