TM 9-2330-381-14
KEY
EXPECTED TEMPERATURES
+40 to
0F to
ABOVE
+32F
-10F
-50F
CAPACITY
INTERVALS
GAA
GREASE, AUTO-
M - Monthly
(MIL-G-10924)
MOTIVE AND
ALL TEMPERATURES
ARTILLERY
S - Semiannually
Storage
A - Annually
Compartment
Hinge
As req
Fixed Steering
Arm Rod End
As req
Wheel Bearing
Cylinder
Bearing
As req
Rear Support
Leg
As req
Suspension
Assembly
As req
Longitudinal
Strut Rod End
As req
Steering
Plate
As req
Steering
Plate Bearing
As req
HO
HYDRAULIC
(MIL-H-46170)
OIL, PETROLEUM
BASED
Hydraulic
Filter
As req
ALL TEMPERATURES
12.
STORAGE COMPARTMENT HINGE. Semiannually lubricate storage compartment hinge. Scrape off any
existing grease that may have built up. Clean surfaces using rags. Hand apply generous portions of grease (GAA) to
storage compartment hinge surface area and wipe off excess with rag.
13.
PLATFORM GREASE FITTINGS. Monthly lubricate platform grease fittings. Clean surrounding areas and all
fittings. DO NOT OVERFILL. Add grease (GAA) to fittings as required and wipe off excess with rag.
14.
HYDRAULIC FILTER. Annually remove and replace hydraulic filter. To drain, close ball valve at hydraulic tank
and unscrew and remove filter housing, gasket, and filter. Clean filter housing using clean fluid (HO). To fill, replace filter
and gasket to filter block. Thread filter housing to filter block.
Change 3 3-11