TM 9-2330-381-14
KEY
EXPECTED TEMPERATURES
+40 to
0F to
ABOVE
+32F
-10F
-50F
CAPACITY
INTERVALS
GAA
GREASE, AUTO-
D - Daily
(MIL-G-10924)
MOTIVE AND
ALL TEMPERATURES
ARTILLERY
M - Monthly
Kingpin and
Q - Quarterly
Pickup Plate
As req
Slider Arm
Pivot Pin
As req
Cylinder
Bearing
As req
Step Assembly
Hinge
As req
Cable Guide
Roller
As req
Pivot Pin
Sheave
As req
Gooseneck
Pivot Pin
As req
Front Cable
Guide (USMC)
As req
Kingpin
Bushing
As req
Slider Arm
Bushing
As req
Steering
Plate
As req
Davit Cup and
Winch
As req
Cylinder
Bearing
As req
5.
KINGPIN AND PICKUP PLATE. Daily, before coupling semitrailer, check for grease on kingpin and pickup plate.
Scrape off any existing grease that may have built up. Clean surfaces using rags. Hand apply generous portions of
grease (GAA) to contact surfaces as required.
6.
GOOSENECK GREASE FITTINGS AND PIVOT PIN SHEAVE. Monthly lubricate gooseneck grease fittings and
pivot pin sheave fitting. Clean surrounding areas and all fittings. DO NOT OVERFILL. Add grease (GAA) to fittings as
required and wipe off excess with rag.
7.
DAVIT MOUNTING CUP, WINCH, AND STEP HINGE. Monthly lubricate davit mounting cup, winch, and step
hinges. Scrape off any existing grease that may have built up. Clean surfaces using rags. Hand apply generous portions
of grease (GAA) to the davit, mounting cup, winch gears, and step hinges. Wipe off excess with rag.
8.
CABLE GUIDES. Quarterly lubricate cable guide grease fittings. Clean surrounding areas and all fittings. DO
NOT OVERFILL. Add grease (GAA) to fittings as required and wipe off excess with rag.
Change 1 3-7
