TM 9-2330-381-14
INSPECTION
1.
Inspect wires and socket connectors for corrosion, frayed or broken wires, and looseness. If socket connectors
are defective, use electrical repair kit and replace as required. If wires are frayed or broken, replace composite
marker light.
2.
Inspect bulb socket for corrosion and defects. If corroded, clean bulb socket by wiping with a wiping rag. If
socket cannot be cleaned or if socket is defective, replace composite marker light.
3.
Inspect for missing or cracked light lens. If defective, replace light lens.
4.
Inspect light bulbs and LED for defects. If defective, replace light bulbs.
Change 3 4-105