TM 9-2330-381-14
4-28.
STEERING PRESSURE INDICATOR LIGHT (CONT)
CAUTION
When cutting tiedown straps and sliding steering pressure indicator light out to
expose solder connections, use caution so that wires do not get cut, caught, or
pulled on the frame or damage to equipment may result.
3.
Remove nut (5) and lockwasher (6). Carefully cut and remove tiedown straps (7) as required and slide steering
pressure indicator light (8) out and away from hydraulic control module gage panel (9). Move steering pressure
indicator light (8) only enough to expose soldered contact points. Discard tiedown straps.
4-114
