TM 9-2330-381-14
4-27.
CLEARANCE LIGHT (CONT)
2.
Inspect for missing, cracked, or nonsealing lens retainer, mounting plate, or lens. If defective, replace clearance
light assembly.
3.
Inspect bulb socket for corrosion and defects.
If socket cannot be cleaned or socket is defective, replace
clearance light assembly.
ASSEMBLY
1.
Install bulb (14) to lamp holder mounting plate (4). Install screw on lamp holder mounting plate (4).
2.
Aline light lens (13) to lens retainer (3) and secure with two push-on nuts (12).
3.
Aline and install lamp holder mounting plate (4) and preformed felt (11) to platform. Secure with three screws (6),
three locknuts (5), screw (9), lockwasher (10), external tooth lockwasher (8), and locknut (7).
4.
Install retainer lens (3) to lamp holder mounting plate (4) and secure with two screws (2).
5.
Reconnect clearance light socket connector (1) to platform wiring harness.
FOLLOW-ON MAINTENANCE
Reconnect intervehicular electrical cable and check clearance lights for proper operation (para. 2-24).
4-28.
STEERING PRESSURE INDICATOR LIGHT
This task covers:
a. Disassembly
b. Inspection
c.
Assembly
INITIAL SETUP
Tools
General mechanics tool kit, item 16, appx. B
Electrical repair kit, item 18, appx. B
4-112