TM 9-2330-381-14
2.
Remove two screws (2) and retainer lens (3) from lamp holder mounting plate (4).
3.
Remove three locknuts (5) and three screws (6). Remove locknut (7), external tooth lockwasher (8), screw (9),
lockwasher (10), preformed felt (11), and lamp holder mounting plate (4) from platform. Discard locknuts,
4.
Remove two push-on nuts (12) and separate light lens (13) from lens retainer (3).
5.
Remove bulb (14) from lamp holder mounting plate (4). Loosen screw on lamp holder mounting plate (4) and
allow to hang loose.
INSPECTION
1.
Inspect wire and socket connector for corrosion, frayed or broken wire, and looseness. If defects exist, replace
clearance light assembly.
4-111