TM 9-2330-381-14
2.
Using APU electrical schematic (figure FO-4) as a guide, reconnect APU wiring harness (2) to APU control box
starter switch, glow plug indicator, oil pressure indicator, current limiter, and current rectifier, if applicable.
3.
Using APU electrical schematic (figure FO-4) as a guide, reconnect APU wiring harness (1) to APU starter,
vanaxial fan, glow plug, and oil pressure sending unit.
NOTE
Tiedown straps should be placed in a logical position to secure wiring harness.
4.
Reinstall new tiedown straps as required.
5.
Secure both harnesses in place by installing each harness into loop clamps (para. 4-108).
Change 1 4-157
