TM 9-2330-381-14
4-39. APU WIRING HARNESS (CONT)
FOLLOW-ON MAINTENANCE
1.
Reinstall jumper wires to APU control box (para. 4-34).
2.
Reconnect battery ground wire to APU pump flange (para. 4-30).
3.
Start and run APU and check for proper operation (para. 2-16).
4-40. SUSPENSION ASSEMBLY/BOGlE
This task covers:
a. Removal
c. Lubrication
b. Inspection
d. Installation
INITIAL SETUP
Tools
Overhead lifting device (5000 lb (2270 kg) minimum capacity) or equivalent
Lifting strap (2), item 31, appx. B
Isolation valve handle extension, item 1, appx. B
Spanner socket, item 4, appx. B
Suspension chain, item 8, appx. B
General mechanics tool kit, item 16, appx. B
The following tools can be found in common tool kit no. 2, item 18, appx. B:
Drain pan, 4 gl
Torque multiplier, 5 to 1, 3/4" drive
Torque wrench, 3/4" drive
Gloves, chemical and oil protective
Ratchet, 3/4" drive
Goggles, industrial
Extension light, 24 ft
Measuring tape, 50 ft
Crowbar
Degreaser tank, 20 gl
Bearing lubricant packer
lubricating handgun
Materials/Parts
Grease, item 12, appx. E
Cap and plug set, item 5, appx. E
Wiping rag, item 19, appx. E
Solvent, cleaning compound, item 26, appx. E
Tape, masking, item 29, appx. E
Locknut
Setscrew
Oil seal
Preformed packing
Personnel Required:
3
4-158
