TM 9-2330-381-14
4-40. SUSPENSION ASSEMBLY/BOGIE (CONT)
9.
If #1 bogie connecting link (10) was disconnected, remove preformed packing (12). Discard preformed packing.
10.
Remove block clamp (13) from two hydraulic hoses (14) as follows:
a. For bogies #1, 2, 3, or 5, remove capscrew (15) and block clamp sections (13).
b. For bogie #4, remove locknut (16), capscrew (17), and block clamp sections (13). Discard locknut.
11.
Using isolation valve handle extension, open isolation valves (1) at all four corners of platform (para. 2-6).
12.
Start APU (para. 2-16). Using a measuring tape, lower platform height to approximately 41 inches (108 cm)
4-162
